Quoizel QR1864C Assembly Instruction

Please go to www.quoizel.com
Tools Required: Flathead screwdriver, Phillips screwdriver, pliers, gloves, safety glasses.
Estimated Assembly Time: 20-30 minutes
Preparation: Identify and inspect all parts before beginning installation. Check package content list and diagrams below to be sure all parts are
present. If any parts are missing or damaged, do not attempt to assemble, install, or operate the mirror. Contact customer service for replacement
parts.
Warnings and Cautions
These instructions are provided for your safety. It is very important you read them completely before installing the mirror. We strongly
recommend that a licensed, professional electrician perform the installation. Quoizel recommends 2 people for each step during assembly.
Package Contents
Mirror Hanger
A
x 2
Hanger Nail
B
x 4
Lock Screw
C
x 4
-
STEP 1 Assemble Mirror
A. Attach the Mirror (D) onto the Mirror
Frame (E). Align the holes on the
Tabs to mounting holes on the
Mirror Frame. Thread Lock Screws
(C) into mounting holes on the
Mirror Frame (E) to secure them
together. Hand tighten until snug.
"C"
BACK
"A"
Floor Surface
OPTIONAL A
Figure 2A
-
STEP 2 Identify the Points for mounting the Mirror Hangers By
Using Measurement
A. Determine where the mirror will be placed on the wall and hold the
Need assistance with parts or assembly? Call Quoizel customer service at 1-800-645-3184
2017 QuoizelInc.
Assembly Instruction Sheet #IS-QR1864C
for product cleaning tips. Go to the
Mirror
D
x 1
Mirror Frame
E
x 1
D
C
"D" Hanger
"D" Hanger
"C"
BACK
"A"
Floor Surface
OPTIONAL B
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
For Style QR1864C
Care + Maintenance selection.
(Step 2 Continued)
mirror on the wall in the position you wish. Mark the wall at the
bottom center of the mirror with a pencil lightly. This will be
Measurement A, the distance from the floor to the bottom of the
mirror.
B. Place the mirror on a flat surface again and measure from the
bottom of the mirror to the "D" hangers that will be used to hang the
mirror, this is measurement B.
C. Add measurement A from step A above and measurement B together
and mark this spot on the wall where the mirror will be hung.
Measurement B is straight up from Measurement A you marked on
the wall in step A above.
D. Measure the distance between the centerline of each "D" hanger
and then divide this measurement by 2, this is Measurement C. In
E
order to locate the exact hanger location on the wall, from
Measurement B go to the right the distance of Measurement C and
mark the wall. Do this going to the left of Measurement B as well and
mark the wall. These two marks are the center of the hangers,
Measurement C. The two marks you just made on the wall are the
same distance apart as the two hangers.
E. (Refer Figure 2B) To determine where the Mirror Hangers (A) will be
fastened to the wall, measure up from Measurement C 3". Do this in
two locations as illustrated and mark the wall.
Figure 2B
Figure 1
-
STEP 3 Installing the 2 Mirror Hangers
A. Using the Nails (B) provided with the Mirror Hangers (A) attach the 2
Mirror Hangers (A) to the wall at the position just marked by Option A
or Option B. Please note the Mirror Hangers are adjustable
allowing for easy leveling of the mirror as needed.
B. Once you have both Mirror Hangers (A) securely nailed in place,
adjust as the length of the Mirror Hangers (A) so that each Mirror
Hanger (A) is the same length.
1of2
Mirror Hanger
C
3"
C
Mark "B"
Hook
Mirror Hanger
Adjustment Screw
Hanger Nail
Figure 3
Hook
_R1
RevisedDate:2017-10-27