Maintenance; Specifications - Makita DMR108N Instruction Manual

Important:
● Before connecting USB device to the charger, always
backup your data of USB device. Otherwise your data
may lose by any possibility.
● The charger may not supply power to some USB
devices.
● When not using or after charging, remove the USB
cable and close the cover.
● Do not connect power source to USB port. Otherwise
there is risk of fire. The USB port is only intended
for charging lower voltage device. Always place the
cover onto the USB port when not charging the lower
voltage device.
● Do not insert a nail, wire, etc. into USB power supply
port. Otherwise a circuit short may cause smoke and
fire.
● Do not connect this USB socket with your PC
USB port, as it is highly possible that it may cause
breakdown of the units.

MAINTENANCE

CAUTION:
Never use gasoline, benzine, thinner, alcohol or the
like. Discoloration, deformation or cracks may result.

Specifications

Power Requirements
AC power adaptor
Battery
Frequency coverage
®
Bluetooth
(The Bluetooth
trademarks owned by Bluetooth SIG, Inc.)
®
Bluetooth version
®
Bluetooth profiles
Transmission power
Transmission range
Supported codec
Compatible
®
Bluetooth profile
Maximum radio-
frequency power
Circuit feature
Loudspeaker
Output Power
Input terminal
Antenna system
Dimension
(W x H x D) in mm
Weight
14 ENGLISH
DC 12V/1,200mA,
center pin positive
UM-3 (AA size) x 2 for back up
Cluster battery: 10.8V
Slide battery: 10.8V - 18V
FM 87.50-108 MHz
(0.05MHz/step)
AM (MW) 522-1,710 kHz
(9kHz/step)
®
word mark and logos are registered
5.0
A2DP/SCMS-T
®
Bluetooth specification power
Class 2
Max. 10m (varies according to
usage conditions)
SBC
A2DP
BT EDR: 1.71dBm
3.5inches 8ohm x 2
10.8V: 1.2W x 2
14.4V: 2.2W x 2
18V: 3.5W x 2
3.5mm dia. (AUX IN)
FM: soft bended rod antenna
AM: bar antenna
282 x 163 x 294mm
4.3Kg (Without battery)