Upgrading The Firmware - Philips SpeechMike Premium Air User Manual

NOTE
• Before you connect the foot control to the
docking station, make sure that the docking
station is neither connected to the computer
nor to the power outlet, as otherwise the foot
control might not be detected.
• Recording and playback of dictations with a
Philips foot control requires dictation software
such as Philips SpeechExec to be installed on
the computer. When third-party dictation soft-
ware other than Philips SpeechExec is used,
driver software must be installed before con-
necting the SpeechMike and the foot control.
• For best recording results during hands-free
dictation, you will probably have to adjust the
recording volume. You can set the recording
volume in the audio settings of your recording
application, e.g. Philips SpeechExec dictation
software or Dragon NaturallySpeaking speech
recognition software.
To connect a foot control for hands-free dictation:
1. Connect a Philips ACC2300 series foot control to the
docking station of your SpeechMike.
2. Connect the docking station to your computer.
Button assignment of Philips foot controls
Foot control ACC2310 / ACC2320
The Philips foot controls 2310 and 2320 have three pedals.
By default, the foot controls 2310 and 2320 have the fol-
lowing configuration:
ACC2310
Foot control ACC2330
The Philips foot control 2330 has four pedals. By default,
the foot control 2330 has the following configuration:
ACC2330

Upgrading the firmware

Your device is controlled by an internal program called firm-
ware. As a part of ongoing product maintenance, the firm-
ware is upgraded and errors are corrected.
It is possible that a newer version (an 'update') of the firm-
ware has been released since you purchased the device. In
this case, you can easily update your device to the latest
version.
Use SpeechControl (Philips Device Control Center) to up-
grade the firmware of your device. You can download the
latest version of the application here:
tion.philips.com/speechcontrol. Please follow the steps
outlined below to upgrade your device.
NOTE
A firmware upgrade is only possible if the follow-
ing preconditions are met:
• The SpeechMike has at least 50% (approx. 12
hours) battery power left.
• The SpeechMike is not in idle mode.
• There is no recording or playback running.
To upgrade your device:
1. Connect the docking station to a power outlet and to
the computer by using the supplied USB cables and the
power supply unit. Then place the SpeechMike into the
docking station.
ACC2320
https://www.dicta-
16