Table of Contents
Advertisement
INSTALLATION
1
FOR BEST RESULTS
Install light 8-15 feet above the ground.
Do not mount fixture close to reflective
surfaces such as windows, white walls,
white surfaces and water.
Do NOT wire to dimming switch.
When mounting fixture, make sure the
photocell orientation is at the bottom
for wall mount and away from building
for eave mount.
When mounting to a wall, make sure
the fixture is 7 in. on center away from
eave and 13 inches on center away from
inside corner of the exterior wall (fig 2).
13 in. 13 in
(fig 2).
2
SHUT OFF ELECTRIC
POWER OFF
Verify wall switch is in OFF position (fig 4).
At the main electrical panel, turn off
the circuit breaker that supplies power
to the junction box you are working on
(fig 5).
For screw-in type fuses, unscrew the
fuse that supplies power to the junction
box you are working on (fig 6).
7 in
Please call 1-844-507-5651 or email support@probrite.com for further assistance.
Wall Mount
NOTE:
Mounting plate (D) mounts to standard recessed
junction boxes. Junction box must be at least
1-1/2 inch deep for proper installation. (fig 3).
1-1/2"
Round
(fig 4).
(fig 5).
5
Eave Mount
(fig 1).
1-1/2"
(fig 3).
Octagonal
(fig 6).
PROBRITE.COM
Advertisement
Table of Contents
