Loading Sheets In The Printer; If Roll Paper Jams - Canon imagePROGRAF iPF650 Basic Manual

Loading Sheets in the Printer

Load sheets in the printer as follows.
• One sheet of paper can be loaded in the Paper Feed Slot at a time. Do not load more than one sheet at a time.
This may cause paper jams.
• Before feeding paper or printing, make sure the sheet is fl at against the Roll Cover . The sheet may jam if it curls
before feeding or printing and the trailing edge drops toward the front.
• Store unused paper in the original package, away from high temperature, humidity, and direct sunlight.
• Paper that is wrinkled or warped may jam. If necessary, straighten the paper and reload it.
• Load the paper straight. Loading paper askew will cause an error.
1
Select sheets as the paper source.
• If a print job was received
Sheets are automatically selected, and the media type
and size specifi ed by the print job are shown on the
Display Screen . Go to the next step.
• If no print job was received
1. Press the Load button.
2. Press ▲ or ▼ to select Load Cut Sheet , and then
press the OK button.
• If any paper has been advanced that will not be used, a message is shown requesting you to remove it.
Press ▲ or ▼ to select Yes , and then press the OK button. Remove the paper and go to the next step.
2
Slide the Width Guide (a) to align it with the mark for the
size of paper you will load.
a
18
OK