Canon imagePROGRAF iPF650 Basic Manual page 15

5
Holding the Roll Holder fl ange (a), guide the holder along
the Roll Loading Slots (b) on both ends, keeping the
holder level as you load it in the Roll Holder Slot .
• Do not force the Roll Holder into the printer with the right and left ends reversed. This may damage the
printer and Roll Holder .
• Do not release the fl anges until you load the holder fully in the Roll Holder Slot , keeping it level.
Accidentally loading the Roll Holder crooked may damage the printer or Roll Holder when paper is
advanced.
Be careful not to pinch your fi ngers between the Roll Loading Slots (b) and the Roll Holder shaft (c)
when loading rolls.
6
Advance the leading edge of the roll in the Paper Feed
Slot (a) until you hear a tone.
The printer now starts advancing the paper, and a menu
for selection of the type of paper is shown on the Display
Screen .
• Be careful not to soil the printing surface of roll paper as you insert it in the slot. This may affect the
printing quality. We recommend wearing clean cloth gloves when handling rolls to protect the printing
surface.
• If the paper is wrinkled or warped, straighten it out before loading it.
• Load paper straight so it is not fed askew.
7
Press ▲ or ▼ to select the type of paper, and then press
the OK button.
• For details on types of paper to select, see the Paper Reference Guide .
(→ , Types of Manuals)
8
Holding it at the positions indicated, close the Roll Cover .
c
15
Loading Rolls in the Printer
b
b
a
a
c
a