Page 1: Table Of Contents
Installation, Maintenance & Parts Manual Fixed and Adjustable Height Stands Table of Contents WARNINGS – General Safety ....Preventative Maintenance and Adjustment ..Introduction .
Page 2: Warnings - General Safety
Upon receipt of shipment: Dorner’s Limited Warranty applies. D Compare shipment with packing slip. Contact factory Dorner reserves the right to make changes at any time regarding discrepancies. without notice or obligation. Fixed and Adjustable Height Stands Set-up, Operation & Maintenance Manual 851-558 Rev.
Page 3: Product Description
FH = Fixed Height AH = Adjustable Height FT = Tall, Fixed Height AT = Tall, Adjustable Height Language Code M = U.S. English H Style Stand Fixed and Adjustable Height Stands Set-up, Operation & Maintenance Manual Dorner Mfg. Corp. 851-558 Rev. B...
Page 4: Installation
Shown assembled. See steps 7 and 8 for boot as- sembly. Required Tools D 6 mm Hex Key Wrench Typical components (Figure 2). Figure 3 Fixed and Adjustable Height Stands Set-up, Operation & Maintenance Manual 851-558 Rev. B Dorner Mfg. Corp.
Page 5 Repeat step 4 for opposite stand leg. Make sure to locate the red warning area (P of Figure 3) on the same ends of stand legs (K of Figure 5). Figure 7 Fixed and Adjustable Height Stands Set-up, Operation & Maintenance Manual Dorner Mfg. Corp. 851-558 Rev. B...
Page 6 Tighten flange socket screws (S) to 150 in–lb (17 N–m). Figure 8 Install u–nuts (N of Figure 9) into outer t–slots of stand legs (K). Fixed and Adjustable Height Stands Set-up, Operation & Maintenance Manual 851-558 Rev. B Dorner Mfg. Corp.
Page 7: Stands Shipped Fully Assembled
Tighten button screw (R) to 150 in–lb (17 N–m). Stand Assembly Boot Assembly (2x) Figure 13 Repeat steps 2 and 3 for opposite stand leg. Figure 11 Fixed and Adjustable Height Stands Set-up, Operation & Maintenance Manual Dorner Mfg. Corp. 851-558 Rev. B...
Page 8: Optional Fine Adjustment Kit
Tighten stand button screws (R of Figure 15) to 150 in–lb (17 N–m). Repeat steps 1 through 4 for opposite stand leg. Figure 15 For leveling and height adjustment see page 9. Fixed and Adjustable Height Stands Set-up, Operation & Maintenance Manual 851-558 Rev. B Dorner Mfg. Corp.
Page 9: Optional Caster Kit
Figure 18 Install carriage bolt (Y of Figure 19) into stand boot Figure 20 Repeat steps 1 through 3 for opposite leg. base plate (AA). Fixed and Adjustable Height Stands Set-up, Operation & Maintenance Manual Dorner Mfg. Corp. 851-558 Rev. B...
Page 10: Preventative Maintenance And Adjustment
Tighten button screws (R) to 150 in–lb (17 N–m). Using a support (AB of Figure 21), raise conveyor and stand off the floor. Repeat steps 2 through 4 on opposite stand leg. Fixed and Adjustable Height Stands Set-up, Operation & Maintenance Manual 851-558 Rev. B Dorner Mfg. Corp.
Page 11: Height Adjustment For Fixed And Adjustable
TIGHTEN SCREWS (R) AFTER ADJUSTMENT. Tighten button screws (R of Figure 21) to 150 in–lb (17 N–m). Repeat steps 1 through 3 on opposite Adjustment Kit. Fixed and Adjustable Height Stands Set-up, Operation & Maintenance Manual Dorner Mfg. Corp. 851-558 Rev. B...
Page 12: Conveyor Angle Adjustment
23) may need to be re-located to other t–slots (AE). N–m) after adjustment. Loosen flange socket screws (S of Figure 23) on both sides of stand Figure 24 Figure 23 Fixed and Adjustable Height Stands Set-up, Operation & Maintenance Manual 851-558 Rev. B Dorner Mfg. Corp.
Page 13: Service Parts
Service Parts NOTE: For replacement parts other than those shown on this page, contact an authorized Dorner Service Center or the factory. Fixed Height Stand w/Feet or Casters Item Part Number Description 710005 Plate, Caster Mtg. Stand 807–640 Caster, 4”...
Page 14 51”–55” ( 1295mm –1397mm) 710211–04863 –2464mm) 52”–56“ (1321mm–1422mm) 710211–04963 94”–98” 2388mm 710211–09163 –2489mm) 53”–57” (1346mm–1448mm) 710211–05063 95”–99” 2413mm –2515mm) 710211–09263 54”–58” 1372mm 710211–05163 –1473mm) Fixed and Adjustable Height Stands Set-up, Operation & Maintenance Manual 851-558 Rev. B Dorner Mfg. Corp.
Page 15 44” (1118mm) 710210–04176 51”–55” ( –1397mm) 710211–04363 1295mm 46” (1169mm) 710210–04376 52”–56“ (1321mm–1422mm) 710211–04463 48” (1220mm) 710210–04576 53”–57” (1346mm–1448mm) 710211–04563 54”–58” 1372mm –1473mm) 710211–04663 Fixed and Adjustable Height Stands Set-up, Operation & Maintenance Manual Dorner Mfg. Corp. 851-558 Rev. B...
Page 16 911016M Scr, Bttn, Metric M10–1.50x16MM 200801M Nut, Quad, M8–1.25 See Leg/Boot Boot, Stand Leg Table 708180P Scr, Sock, Metric M6–1.00x25MM 807–1286 Bolt, Carriage M10–1.5x25MM Fixed and Adjustable Height Stands Set-up, Operation & Maintenance Manual 851-558 Rev. B Dorner Mfg. Corp.
Page 17 29”–41” 710211–02163 710031–01616 (737mm–1041mm) 35”–53” 710211–02763 710031–02216 (889mm–1346mm) 47”–65” 710211–03963 710031–02216 (1194mm–1651mm) 59”–77” 710211–05163 710031–02216 (1499mm–1956mm) 71”–89” 710211–06363 710031–02216 (1803mm–2261mm) 81”–99” 710211–07363 710031–02216 (2057mm–2515mm) Fixed and Adjustable Height Stands Set-up, Operation & Maintenance Manual Dorner Mfg. Corp. 851-558 Rev. B...
Page 18 Scr, Bttn, Metric M10–1.50x16mm 200801M Nut, Quad, M8–1.25 710004 Foot, Stand, Floor Mtg 920883M Scr, Flange, Socket M8–1.25x16mm 960896M Scr, Tri–Lobe, Hd–Hex M8x25mm 961030M Bolt, Carriage M10–1.5x35mm Fixed and Adjustable Height Stands Set-up, Operation & Maintenance Manual 851-558 Rev. B Dorner Mfg. Corp.
Page 19 92”–96” (2337mm–2438mm) 710211–08863 64”–68” (1626mm–1727mm) 710211–06063 93”–97” (2362mm–2464mm) 710211–08963 65”–69” (1651mm–1753mm) 710211–06163 94”–98” (2388mm–2489mm) 710211–09063 66”–70” (1676mm–1778mm) 710211–06263 67”–71” (1702mm–1803mm) 710211–06363 95”–99” (2413mm–2515mm) 710211–09163 Fixed and Adjustable Height Stands Set-up, Operation & Maintenance Manual Dorner Mfg. Corp. 851-558 Rev. B...
Page 20 Item 2: Inner Leg Table (Adjustable Height With Foot) Stand Height Range Leg Part Number 42”–60” (1067mm–1524mm) 710211–03763 54”–72” (1372mm–1829mm) 710211–04963 66”–84” (1676mm–2134mm) 710211–06163 78”–96” (1981mm–2438mm) 710211–07363 Fixed and Adjustable Height Stands Set-up, Operation & Maintenance Manual 851-558 Rev. B Dorner Mfg. Corp.
Page 21 Service Parts Optional Fine Adjustment Kit Item Part Number Description 710028 Fine Adjustment Kit Fixed and Adjustable Height Stands Set-up, Operation & Maintenance Manual Dorner Mfg. Corp. 851-558 Rev. B...
Page 22: Return Policy
A representative will discuss action to be taken on the returned items and provide a Returned Goods Authorization number for reference. There will be a return charge on all new undamaged items returned for credit where Dorner was not at fault. Dorner is not responsible for return freight on such items.

This manual is also suitable for:

39mfh12–3248fp

Dorner 39M Series Installation, Maintenance & Parts Manual

Quick Links

Table of Contents

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Dorner 39M Series

Summary of Contents for Dorner 39M Series

This manual is also suitable for:

Table of Contents