6
®
Install the Printer Driver (Windows
)
1
Be sure to TURN THE PRINTER OFF before
continuing.
POWER
POWER
Button
Lamp
NOTE: For Windows
®
XP or Windows
2000, log on to Windows as a member
of the Administrators group before
continuing.
IMPORTANT: If you see the Found
New Hardware Wizard, click Cancel.
Close any open software applications,
2
then insert the "i9100 Setup Software &
User's Guide" CD-ROM. The setup program
should run automatically.
NOTE: If the setup program does not run,
click Start, then Run, then type
D:\msetup.exe, where D is your CD-ROM
drive.
3
Read the License Agreement, then
click Yes to continue.
4
When the main menu appears, click Install.
NOTE: If you are prompted to restart
Windows, remove the CD-ROM, then click
OK. After the computer restarts, insert the
CD-ROM and continue.
5
When the Printer Port window appears,
TURN THE PRINTER ON. The software will
begin identifying the printer port being used.
IMPORTANT: If your computer cannot
detect a printer port, refer to the
Troubleshooting chapter in the "i9100
Quick Start Guide" for instructions.
When the driver installation is complete,
6
click Finish.
7
Register your product to ensure product
support. Follow the on-screen instructions.
When the software menu appears, click
8
Install.
9
When the software installation is complete,
click OK, then Exit.
IMPORTANT: To ensure highest quality
output, continue with Step 7 Align the
Print Head.
6
Install the Printer Driver (Macintosh
1
Turn on your Mac and your printer and
insert the "i9100 Setup Software & User's
Guide" CD-ROM.
Double-click the CD-ROM icon, then the
2
Mac OS X folder, then the Printer Driver
folder.
3
Double-click the i9100 180.pkg icon.
4
When the "Authenticate" screen appears,
enter your administrator name and
password, then click OK.
5
When the "Welcome to the BJ printer driver
Installer" screen appears, click Continue.
6
Read the Software License Agreement
and click Continue, then click Agree.
7
Select a destination for the printer driver
to be installed. Then click Continue.
®
)
8
Click Install. When a message asking for
your confirmation to proceed with the
installation, click Continue Installation.
When the message "The software was
9
successfully installed" appears, click
Restart.
Access your CD-ROM again. From the
10
Application folder, double-click on the
software to be installed.
Follow the on-screen instructions. When the
11
"Installation has finished" screen appears,
click OK.
NOTE: Be sure to register your product.
The serial number is located on the
inside of the printer, to the right of the
print head.
IMPORTANT: To ensure highest
quality output, continue with Step 7
Align the Print Head.
7
Align the Print Head
Before using the printer, align the print head
to ensure the best quality printing.
1
Load a sheet of blank paper in the
paper rest.
2
Start the alignment procedure.
Windows:
a. For Windows XP/2000 click Start,
select Control Panel, Printers and
Other Hardware, then Printers and
Faxes.
b. Right-click the i9100 icon,
then click Printing Preferences.
NOTE: For Windows 98/Me click
Start, then select Settings,
Printers. Right-click the i9100 icon,
then click Properties.
c. Click the Maintenance tab, then
click on the Print Head Alignment
icon.
d. When asked to start print head
alignment, click OK.
e. Follow the on-screen instructions.
Macintosh OS X:
a. Double-click the Macintosh HD icon,
then Applications folder. Double-click
the Utilities folder, then the Print Center
icon. When the Printer List screen
appears, select
i9100.
Under Printers menu, select Configure
Printer. Select i9100, and click Select.
b. Click the down-arrow to select Test
Print.
c. Click the Print Head Alignment icon.
3
Follow the on-screen instructions.
4
Click OK (Windows) or Send (Macintosh)
when finished.
Part no. QA7-2669-V01
© 2003 Canon U.S.A., Inc.
Canon is a Registered Trademark of Canon Inc.
All other products and brand names are registered
trademarks or trademarks of their respective owners.
Specifications subject to change without notice.
40-42430-1102
Printed in Thailand