Canon i900D Printing Manual page 4

About "Layout"
When "Default setting" (selections based on the printer setting) is selected, the printer operates base on the "Borderless Printing" setting
made using the controls of the printer.
About "Image optimize"
When "Default setting" (selections based on the printer setting) is selected, the printer operates based on the "Photo Optimizer" and
"Noise Reduction" settings made using the controls of the printer.
If you use a Canon PictBridge-compatible camera, you can select "VIVID", "NR", or "VIVID+NR". (Note that these options cannot be
selected for some models.)
About "Date print"
"Date Print" depends on the settings made using the controls of the camera.
This printer can handle only Exif/JPEG image data to produce photos using PictBridge.
Never disconnect the USB cable during printing.
When disconnecting the USB cable between the digital camera and the printer, follow the instructions given in the
Instruction Manual of Camera.
Controls of the digital camera cannot be used for the following:
• Print quality setting
• Printer maintenance
QA7-2805-V01 XX2003XX © CANON INC. 2003 PRINTED IN THAILAND