Handling Error Messages - Canon i850 Quick Start Manual

Color bubble jet printer
Hide thumbs Also See for i850:
Table of Contents

Advertisement

Troubleshooting

Handling Error Messages

When a printer error occurs, the POWER/ERROR lamp flashes. The number of
flashes indicate the type of error that has occurred. Count the flashes and
take the appropriate action to correct the error.
Number of
Possible Cause
flashes
Two flashes
Indicates printer is
out of paper
Three flashes
Indicates paper jam If a paper jam occurs, clear the jammed paper, reload paper in the printer, then
Four flashes
Indicates empty ink
tank
Six flashes
Indicates print head
not installed
Seven flashes
Indicates defective
print head
Eight flashes
Indicates waste ink
tank almost full
Note
POWER lamp flashes
alternately green and
orange
52
Reload paper and press the RESUME/CANCEL
press the RESUME/CANCEL
RESUME/CANCEL
RESUME/CANCEL button. See "Paper Jams
RESUME/CANCEL
Press the RESUME/CANCEL
RESUME/CANCEL button to resume printing with ink out condition.
RESUME/CANCEL
RESUME/CANCEL
Replace with a new ink tank immediately after the printing. It may damage the
printer if you continue printing with ink out condition.
See "Replacing an Ink Tank
Replacing an Ink Tank
Replacing an Ink Tank" on page 29
Replacing an Ink Tank
Install print head. If print head is already installed, remove the print head and
check the contacts for foreign matter, then reinstall.
After reinstall the print head, you may need to realign it.
Remove the print head and check the contacts for foreign matter, then reinstall.
If the print head fails to work properly after reinstalling it, contact the Customer
Care Center.
The printer has a built-in waste ink tank to hold the ink consumed during print
head cleaning.
Eight flash indicates that this tank is nearly full.
Press the RESUME/CANCEL
RESUME/CANCEL button to clear the error so printing can continue.
RESUME/CANCEL
RESUME/CANCEL
Contact the Customer Care Center.
An error that requires contacting the Customer Care Center may have occurred.
Turn off and unplug the printer from the power supply. Then plug the printer back
in and turn it back on. Should the problem persist, contact the Customer Care
Center.
Try This
RESUME/CANCEL button.
RESUME/CANCEL
RESUME/CANCEL
Paper Jams" on page 51
Paper Jams
Paper Jams

Advertisement

Table of Contents
loading

Table of Contents