Creative Sound BlasterAxx AXX 200 User Manual page 10

Charging the Sound BlasterAxx
Connect your AXX 200 to a power supply via an adapter or the Docking Base (available separately), or
to your computer by using the MicroUSB-to-USB cable.
Charge your Sound BlasterAxx for approximately 6 hours. It is recommended that you charge it for at
least 8 hours before it is used for the first time.
Note:
Lithium-ion battery life may suffer when it is constantly fully depleted or overexerted
l
at low voltage. It is a good practice to keep the battery well charged.
For optimal charging, it is recommended to keep the volume low while the AXX 200 is
l
being charged, or when charging an external device (e.g. phone, MP3 player, etc.).
When turned on, some external devices require a higher charging rate than battery
l
banks can typically provide. For the quickest charging time, turn off your external
device before charging it.
When the battery is low while playing at loud volumes, the amplifier will intelligently
l
and automatically adjust the volume to a lower and appropriate level so as to extend
the battery life.
Charging via the Docking Base
Note:
The AXX 200 Docking Base is available separately.
Setting Up Your Sound BlasterAxx 9