Newstripe Pack-Master Product Manual
Hide thumbs
Also See for Pack-Master:
- Product manual (10 pages) ,
- Assembly instructions (5 pages) ,
- Product manual (10 pages)
Subscribe to Our Youtube Channel
Related Manuals for Newstripe Pack-Master
Summary of Contents for Newstripe Pack-Master
- Page 1 PACK-MASTER MANUAL ALWAYS wear safety goggles or protective eye-wear when operating the unit! Pack-Master Product Manual Pack-Master Manual / 1258.0420 Page 1 of...
- Page 2 PACK-MASTER MANUAL ALWAYS wear safety goggles or protective eye-wear when operating the unit! Pack-Master Manual / 1258.0420 Page 2 of...
- Page 3 Failure to follow specified instructions may result in equipment damage or serious injury to personnel. The Pack-Master is not designed for crushing of glass containers or items that may shatter or contain volatile vapors. ...
- Page 4 PACK-MASTER MANUAL ALWAYS wear safety goggles or protective eye-wear when operating the unit! Your Pack-Master Manual will arrive in 1 box and include these parts: Box: Parts Bag Containing: Ram Plate with 2 ½” Bolt & 4 – ½” x 1 ½” Long Bolts ...
- Page 5 Handle Socket #12 Pitman Pin #14 Handle Socket Bolt Handle Socket Nut Pitman Arm Upper 3” Jack Pin W/Lever #11 Jack Support Stud Shear Pin W/Nut #9 Lower 4” Jack Pin W/Lever #10 OPERATION Pack-Master Manual / 1258.0420 Page 5 of...
- Page 6 ALWAYS wear safety goggles or protective eye-wear when operating the unit! 1) To operate the Pack-Master, engage the handle lock as shown. 2) Swing the lower lever to the “DOWN” position first, and then the upper lever to the “DOWN” position.
- Page 7 Failure to adhere to the following statements about unsafe practices may cause hazards that cause serious injury. The Pack-Master is not designed for crushing of glass containers or items that may shatter or contain volatile vapors. DO NOT extend or modify the handle in any way.
- Page 8 Jack Face Plate 10002570 Face Plate #19 Jack Handle Figure 1 Jack Assembly #5 View from rear of unit Jack Tongue Mounting Bracket #4 Right Upright Left Upright Ram Plate #6 Base Plate #3 Pack-Master Manual / 1258.0420 Page 8 of...
- Page 9 CUSTOMER MUST NOTE DAMAGES on the Bill of Lading of Trucking Company or Railroad; and Newstripe, Inc. will furnish to the customer the cost or parts and labor. The customer can then bill the common carrier for the damages by placing his signature on the documents.
Need help?
Do you have a question about the Pack-Master and is the answer not in the manual?
Questions and answers