Canon BJC-S300 Setup Instructions page 2

6
Install the Printer Driver (Windows
1 Be sure the printer is off before continuing.
POWER POWER
Button Light
NOTE: For Windows 2000, log on to Windows
as an Administrator before continuing.
IMPORTANT: If you see this screen,
click Cancel and continue.
Close any open software applications,
2
then insert the S300 Setup Software &
User's Guide CD-ROM. The setup program
should run automatically.
NOTE: If the setup program does not run,
click Start, then Run, then type x:\msetup.exe,
where x is your CD-ROM drive.
Read the Welcome screen, then click Next.
3
Read the License Agreement, then click Yes.
4
5 When the main menu appears, click
Install Software.
NOTE: If you are prompted to restart Windows,
remove the CD-ROM, then click OK. After the
computer restarts, insert the CD-ROM and continue.
)
®
Click Start. (If the Printer Driver button
6
is not red, select Printer Driver, then
click Start.) The printer driver will start
loading automatically.
When the Printer Port window appears,
7
TURN THE PRINTER ON so the printer port
(connection) can be automatically detected.
The software will begin identifying the
printer port being used.
IMPORTANT: If your computer cannot
detect a printer port, refer to the
Troubleshooting chapter in the
S300 Quick Start Guide for instructions.
When the Terminate Installation window
8
appears, click OK.
If you are prompted to restart the computer,
9
click Yes. When the installation and
registration process has completed, click Exit.
NOTE: Remember to register your product to
ensure product support. The serial number is
located on the inside of the printer, to the
right of the printhead.
NOTE: You can now install the BJ Solution
software.
You will need to align the printhead
10
before printing. Continue with step
7 Align the Printhead.
6
Install the Printer Driver (Macintosh
1 Insert the S300 Setup Software & User's
Guide CD-ROM.
Open the printer driver folder on the
2
CD-ROM, then double-click the Installer
icon.
Read the License Agreement, then click
3
Accept.
Click Install. The printer driver will load
4
automatically.
If the message "No other applications can
5
be running..." displays, click Continue.
When the installation and registration
6
process has completed, TURN THE
PRINTER ON, then click Restart.
NOTE: Remember to register your product to
ensure product support. The serial number is
located on the inside of the printer, to the
right of the printhead.
)
®
7 After the computer restarts, select the
Apple menu, then Chooser.
8 Click the S300 icon in the Chooser. The
printer name will highlight and move to
the right panel.
NOTE: To use the BJ Print Monitor, set the
Backgrounding button to the On position.
Close the Chooser.
9
NOTE: You can now install the BJ Solution
software.
You will need to align the printhead
10
before printing. Continue with step
7 Align the Printhead.
7
Align the Printhead
1 Place a stack of blank paper in the
paper rest.
Start the alignment procedure.
2
Windows:
a. Click Start, then Settings, then
Printers.
b. Right-click the Canon S300 icon,
then click Properties.
c. Click the Maintenance tab, then
click the Print Head Alignment icon.
d. When asked to start printhead
alignment, click OK.
e. Follow the on-screen instructions
to complete printhead alignment.
Macintosh:
a. From the File menu in a software
application, click Page Setup.
b. Click the Utilities button.
c. Click the down-arrow to select
Test Print.
d. Click the Print Head Alignment icon.
e. Follow the on-screen instructions
to complete printhead alignment.
Click OK (Windows) or Close (Macintosh)
3
when finished.
Part no. QA7-1635
© 2001 Canon U.S.A. Inc.
Canon, BJ, BCI and Bubble Jet are trademarks of Canon Inc.
All other products and brand names are registered
trademarks or trademarks of their respective owners.
Specifications subject to change without notice.
PRINTED IN THAILAND