Canon BJC-S300 Start Here

1
Unpack the Printer
Carefully remove all items from the box.
1
S300 Series
Color Bubble Jet Printer
Paper Rest
Output Tray
Documentation
and Software Kit
S300 BJ (Bubble Jet) Printhead Power Cord
Ink Tanks
BCI-24 Black BCI-24 Color
All manuals and user guides at all-guides.com
2
Prepare the Printer
Remove the shipping tape from the front
1
and sides of the printer.
Shipping Tape
Plug the power cord into the back of the
2
printer and connect the other end to a
power outlet.
Press the POWER button.
3
POWER POWER
Button Light
Open the front cover. The printhead holder
4
automatically moves to the center.
Serial number
Write down the serial number located to
5
the right of the printhead. You will need
this later to register the product.
Start Here
Easy Setup Instructions
3
Install the Printhead
Remove the printhead from its package.
1
Turn the printhead over, then remove
2
the orange protective cap.
NOTE: Do not touch the electrical contacts.
Electrical contacts
3 Raise the gray lock lever.
4 Gently slide the printhead into the holder
until it is securely seated.
Do not press it down.
Lower the lock lever until it locks into place.
5
4
Install the Ink Tanks
Remove the black ink tank (BCI-24 Black)
1
from its packaging and pull off the orange
protective cap.
Protective cap
NOTE: To avoid spilling ink, do not touch the
bottom of the tank once you have removed
the protective cap.
Insert the black ink tank into the slot on the
2
right. Press down gently until the ink tank
locks into place.
Repeat the procedure for the color ink tank
3
(BCI-24 Color), inserting it into the remaining
slot.
4 Close the front cover and attach the
paper rest and output tray.
Color Bubble Jet Printer
™
S300
5
Connect the Printer
To Your Computer
Turn the printer off.
1
IMPORTANT: Be sure printer is
off before continuing, or the
computer will attempt to install
the printer driver before the
printer is ready.
2 Connect one end of a USB cable (not
included) to the computer, the other to
the printer.
USB Port
USB Cable
Continue with Step 6
on side two.
Canon USA S300 SH S1 GM.ai
Clarity 11 April 2001