Canon BJC-S200 Quick Start Manual page 41

S200 QS.book Page 37 Tuesday, September 18, 2001 9:02 AM
Problem
Error
message
displays in
the BJ Status
Monitor or
BJ Status
dialog box
(continued)
Low ink
warning
displays in
the BJ Status
Monitor or
the BJ Status
Dialog
Error
message
displays in
the BJ Status
Monitor or
the BJ Status
Dialog
Possible Cause
Paper jam See the troubleshooting topic "Paper jams in the printer" on page 33.
No printhead Install the printhead.
If the problem persists, contact the Customer Care Center.
Front cover open Make sure the printhead is installed correctly and close the front cover.
One or both ink After the low ink warning displays, you can continue printing for a
tanks are low short time, but have a replacement ink tank ready to install.
W
INDOWS
The ink tank icons are displayed side by side on the BJ Status
Monitor. The icon on the left refers to the color ink tank, while
the icon on the right refers to the black ink tank.
M
AC
The ink tank icons are displayed side by side on the BJ Status
Dialog. The icon on the left refers to the color ink tank, while
the icon on the right refers to the black ink tank.
The low ink warning is enabled only when Background Printing
is turned on in the Chooser.
Printer is out of W
INDOWS
paper
The BJ Status Monitor opens and displays a message when an
Ink is low error occurs.
Paper jam Read the error message, then click the Guide tab to display
more information about solving the problem.
Printhead
installed M
AC
incorrectly
Background Printing must be turned on in the Chooser for the
Front cover open BJ Status Dialog to display errors.
Follow the instructions in the message to resolve the problem.
Troubleshooting
Try This
OS
OS
37