Replacing Ink Tanks - Canon BJC-S200 Quick Start Manual

S200 QS.book Page 23 Tuesday, September 18, 2001 9:02 AM
The Ink Level icons display the ink levels for each tank. The following symbols
may appear at the upper right corner of an icon:
Ink low. Replace ink tank as soon as possible.
Ink out. The ink tank may have run out of ink.
Not synchronized. The ink level may not be synchronized with its ink counter.
For information on how to synchronize ink levels and counters, see "To reset the
ink counter in Mac OS" on page 24.

Replacing Ink Tanks

To replace an empty ink tank:
1.
With the printer on, open the front cover. The printhead holder will
automatically move to the center.
2.
Pull the tab on the front of the empty ink tank toward you to release, then
remove and discard the empty tank.
3.
Remove the new ink tank from its package.
4.
Align the new ink tank with the correct slot, then
gently insert it.
5.
Press down on the ink tank until it clicks into place.
6.
Close the front cover.
To avoid spilling ink, do not touch
the bottom of the tank once you
have removed the protective cap.
Do not force an ink tank into the
printhead. If the ink tank does not go
in smoothly, realign it, then try again.
Remember to reset the ink counter
after replacing an ink tank.
Printing Maintenance
23