Appliquéing - Brother 885-V51 Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
k Remove the upper thread.
Note
Be sure to raise the presser foot lever before
removing the upper thread. If you remove
the upper thread with the embroidery foot
lowered, it may cause malfunction.
l Set up embroidery thread for the next color,
and repeat steps
When the last color is embroidered,
"Finished sewing." will appear on the
display. Press
return to the initial screen.
m
Cut the excess thread.
Memo
For the programmed thread cutting setting,
refer to "Setting for embroidering" (page 52).
b h
through .
, and the display will
Appliquéing
Prepare the base fabric and the appliqué fabric
(appliqué piece). Press
the thread color display to NAME OF COLOR, so
"APPLIQUE MATERIAL", "APPLIQUE POSITION" and
"APPLIQUE" are displayed on the screen.
a
Select an appliqué pattern.
"APPLIQUE MATERIAL" is displayed on the
screen.
b
Apply iron-on stabilizer to the back of the
appliqué piece fabric, and stretch it on the
embroidery frame.
c Lower the presser foot lever, and press
(Start/stop button).
The cut-out for the appliqué piece is sewn,
and the machine stops.
b
a Cut-out line
b Appliqué piece fabric
"APPLIQUE POSITION" will be displayed on
the screen.
(Settings key), and set
a
Embroidering 59
2