Canon BJC-4400 Series Quick Start Manual page 10

See the description starting on page 15 for tips on installing the AT&T WorldNet Service.
If you do not install Canon Creative now, you can always load it later. Simply refer to
the Quick Start Guide that comes in the Canon Creative CD packet.
After installing Canon Creative (or after you cancel installation of Canon Creative),
the Setup program starts Product Registration. If you register your product now,
you don't need to mail in the Registration card that comes in the box.
When installation is complete, the Setup program determines whether or not your
computer needs to be restarted.
If you do not have a CD drive, you can download the printer driver from Canon's Web
site, or you can contact Canon to order diskettes for a small handling fee (see the Canon
Customer Care Center information on the back cover).
Printer Setup for Windows 3.1
1
Start up
Turn on your printer, and then turn on your computer.
your system.
2
Make sure 1. Insert the CD labeled
Windows 3.1 Canon Creative
starts. Disk One into your
CD drive.
Be sure to wait
2. From Program Manager,
for Windows
select Run in the File menu.
to complete
each operation.
3. You see this screen:
Type D: \SETUP (where D:is your
CD drive... most CD drives are D: or E:).
Then click OK.
4. Follow the on-screen instructions.
(Select BJC-4400 Series from the list
of printers.)
5. When complete, restart Windows.
CANON BJC-4400/QSG, Page 11 - File: 44_QSP11.eps
W. Swanlund UP/Correx> 12 March 1998
11