Specifications; Maintaining The Charger - Guest 2606A Operation Manual

OPERATIONS MANUAL: 6 AMP PORTABLE BATTERY CHARGER

SPECIFICATIONS

Output
Charging
Maintaining
Input
Rated AC Voltage
Current Draw
Maximum recommended battery size
For recharging
Maintenance only
Physical Dimensions
Height
Width
Depth
Weight

MAINTAINING THE CHARGER

Periodically clean both battery terminals with baking soda and tighten all connections.
No other maintenance on the charger is required.
FCC Class B EMC Notice
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. Operation of
this equipment in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own expense.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning this equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
12 Volts DC (min.) at 6 Amps
13.30 Volts DC at 0.1 Amps
100 – 130 VAC, 50/60 Hz
1.6 Amps at full output
Up to 72 Amp-Hours
Up to 144 Amp-Hours
3.5 in. (8.9 cm.)
6.4 in. (16.3 cm.)
2.1 in. (5.3 cm.)
3.5 lb. (1.6 kg)
marinco.com/guest | 800.307.6702 7