Replacing The Battery - Bissell SPINWAVE 2931N Manual

Replacing the Battery

1.
Turn the Power Switch OFF.
4.
Note the tape location that
covers over the connectors.
Remove the tape by
unwrapping, then separate the
connectors.
Note: Any other servicing should be performed by an authorized service representative.
WARNING
troubleshooting checks.
2.
Use a Phillips-head
screwdriver to remove the two
screws and battery cover.
5.
Connect the new battery.
Wrap the tape to the original
location to completely cover
the connectors and terminals.
Do not remove the plastic
shrink sleeve from the battery
pack.
To reduce the risk of electric shock, turn the Power Switch OFF before performing maintenance or
3.
Remove the battery and
disconnect.
6.
Use a Phillips-head
screwdriver to replace the
battery cover.
global.BISSELL.com 9