Troubleshooting; Cannot Connect To The Machine; The Following Screen Is Displayed During Setup - Canon PIXMA MP970 SERIES Network Setup Manual

Troubleshooting

This section describes troubleshooting tips for problems you may encounter when setting up.
Note
If you do not find a description for your trouble here, refer to "Troubleshooting" in the User's Guide on-
screen manual.
Troubles in setup/connections
"Cannot connect to the machine (the machine is not detected)" on page 28
• "The machine is not detected" on page 28
• "No printer is detected after the network settings are changed" on page 28
"The following screen is displayed during setup" on page 29
• "The Set Printer IP Address dialog box is displayed during setup" on page 29
• "The Enter Password or Password Input dialog box is displayed during setup" on page 30
• ""Communication with the Card Slot failed." is displayed during the network setup of the Card
Slot" on page 31
• ""The Card Slot is already mapped as Network Drive to this computer." is displayed
during setup" on page 32
• ""Cannot map any more drives, because all the drive letters are assigned." is
displayed during the network setup of the Card Slot" on page 32
Other troubles
Refer to "Troubleshooting" in the User's Guide on-screen manual.
27