Onkyo TX-NR5100 Instruction Manual page 95

1. Input/Output Assign
„ 3. Digital Audio Input
Change input assignment between the input selectors and DIGITAL IN
COAXIAL/OPTICAL jacks. If you do not assign a jack, select "---".
‰ BD/DVD (Default Value: ---)
GAME (Default Value: ---)
CBL/SAT (Default Value: ---)
STRM BOX (Default Value: ---)
PC (Default Value: ---)
CD (Default Value: COAXIAL)
TV (Default Value: OPTICAL)
COAXIAL, Assign the COAXIAL terminal or OPTICAL terminal to any
OPTICAL input selector.
• Supported sampling rates for PCM signals (stereo, mono) from a digital input are
32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz/16bit, 20bit, and 24bit.
„ 4. Analog Audio Input
Change input assignment between the input selectors and AUDIO IN jacks. If
you do not assign a jack, select "---".
‰ BD/DVD (Default Value: ---)
GAME (Default Value: ---)
CBL/SAT (Default Value: ---)
STRM BOX (Default Value: ---)
PC (Default Value: AUDIO 1)
AUX (Default Value: AUDIO 2)
CD (Default Value: AUDIO 3)
TV (Default Value: ---)
AUDIO 1, Assign the AUDIO IN terminal to any input selector.
AUDIO 2,
AUDIO 3
Setup Setup
95