Onkyo TX-NR5100 Instruction Manual page 93

1. Input/Output Assign
‰ HDMI 4K/8K Signal Format
Set the 4K/8K signal format input and output by this unit. Set to suit the TV or
player connected.
• For resolutions supported by this unit, refer to "Supported input
resolutions" ( →p154).
BD/DVD (Default Value: 4K Enhanced)
GAME (Default Value: 4K Enhanced)
CBL/SAT (Default Value: 4K Enhanced)
STRM BOX (Default Value: 4K Enhanced)
PC (Default Value: 4K Enhanced)
CD (Default Value: 4K Enhanced)
TV (Default Value: 4K Enhanced)
4K Standard When using a High Speed HDMI Cable that supports
10.2 Gbps to connect a TV or player compatible with standard
4K signal formats (4K 30Hz, etc.)
4K Enhanced When using a Premium High Speed HDMI Cable that supports
18 Gbps to connect a TV or player compatible with high-
definition 4K signal formats (4K 60Hz, 4K HDR, etc.)
• There may be some image disruption depending on the
connected component and the HDMI cable. If this occurs,
switch to "4K Standard".
8K Standard When using an 18 Gbps-compatible PREMIUM High Speed
HDMI Cable or a 48 Gbps-compatible ULTRA High Speed
HDMI Cable to connect a TV or player compatible with
4K/120p or 5K, 8K signal formats
‰ OSD Language (Default Value: English)
Select the on-screen display language from the following.
English, German, French, Spanish, Italian, Dutch, Swedish
‰ Impose OSD (Default Value: On)
Set whether or not to display information such as volume adjustment or
switching of input on the TV screen.
On OSD is displayed on the TV
• OSD may not be displayed depending on the input signal
even if "On" is selected. In this case, change the resolution
of the connected device.
Off OSD is not displayed on the TV
Setup Setup
93