Advertisement
CAUTION: NO USER SERVICEABLE PARTS INSIDE. Do not open the amplifier chassis or remove any of its screws.
Contact Audio Alchemy or your dealer if you have service needs.
WARNING: Do not expose this device to moisture or excessive humidity, and do not use it outdoors. Fire hazard may re-
sult.
The lightning flash with arrowhead, within an
equilateral triangle, is intended to alert the us-
er to the presence of uninsulated dangerous
voltage within the product enclosure that may
be of sufficient mgagnitude to constitute a risk
of electrical shock to persons.
DPA-1 Limited Warranty
Audio Alchemy warrants the DPA-1 against manufacturing defects and defects in materials for two years from the date of purchase. The
warranty must be exercised through an authorized Audio Alchemy dealer, subject to the conditions listed below:
1) The warranty covers only new products purchased from an authorized Audio Alchemy dealer.
2) The warranty is non-transferable and is valid only for the original purchaser.
3) The warranty is valid only if the product has been used according to the instructions in the owner's manual. Damage due to accidents or
owner abuse or neglect is not covered.
4) All service must be performed by Audio Alchemy or an authorized Audio Alchemy dealer. Damage resulting from service by other parties
is not covered under this warranty.
5) All products returned for service must be packaged in the original container and must include a photocopy or computer printout of the
original purchase receipt. If the original container has been lost or discarded, contact Audio Alchemy for a replacement.
6) This warranty covers only defects in Audio Alchemy products. It does not cover incidental or consequential damages, or damage to oth-
er products resulting from defects in Audio Alchemy products.
7) If the product must be shipped back to Audio Alchemy for warranty service, the customer will pay shipping costs. Audio Alchemy will pay
return shipping.
8) Before shipping the product to Audio Alchemy for service, the customer must obtain a Return Authorization (RA) number from Audio Al-
chemy. The RA number must be marked clearly on the package.
9) U.S. residents: Depending on which state you live in, you may have other rights not elaborated in this document. For further information,
contact Audio Alchemy.
10) Residents of other countries: Your authorized dealer bears the direct responsibility for warranty coverage of your amplifier. Please con-
tact your dealer with requests for service under warranty.
For questions on warranty and service matters, contact Audio Alchemy at info@audioalchemy.com. You may also call 805.323.6005, but
for faster service we recommend you e-mail.
Legal Notifications
Audio Alchemy is a registered trademark of Audio Alchemy LLC. Information in this manual is subject to change without notice. The infor-
mation in this manual is the sole property of Audio Alchemy. Any reproduction in whole or part without the expressed written permission of
Audio Alchemy is prohibited. No material herein may be transmitted in any way including either electronic or mechanical methods for any
purpose without expressed written permission of Audio Alchemy.
Important Guidelines for Installation and Use
■ Do not connect the outputs of the amplifier to the speaker-level inputs of a powered subwoofer. It could damage the amplifier
because the grounds of these inputs are usually tied together, and the amplifier's output terminals are not.
■ Do not connect the AC power cord until all audio connections have been made.
■ Place the DPA-1 where it will not be exposed to moisture or direct sunlight.
■ Install the DPA-1 where it can get some ventilation. The amplifier doesn't produce a great deal of heat, but using it in a sealed enclosure
with no airflow could have long-term negative effects on the unit's circuitry.
■ Use a soft microfiber cloth to clean dust and fingerprints off of the DPA-1's surface. Stubborn fingerprints or dirt may be removed by
spraying a small amount of water or window cleaner onto the cloth, then using the moistened cloth to clean the DPA-1. Do not spray any
cleaner or other moisture directly onto the DPA-1.
■
You will get the best and most reliable performance from the DPA-1 by using high-quality audio cables.
Maintenance
The DPA-1 requires no user maintenance, although it's a good idea to occasionally wipe any accumulated dust off of it. To do this, use a
soft microfiber cloth and wipe gently to remove any dust. Stubborn fingerprints or dirt may be removed by spraying a small amount of wa-
ter or window cleaner onto the cloth, then using the moistened cloth to clean the DPA-1. Do not spray any cleaner or other moisture di-
rectly onto the DPA-1.
If the DPA-1 does not seem to be working properly, please contact your dealer. Do not attempt to open the chassis;—there are no user-
serviceable parts inside.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating maintenance
(servicing) instructions in the literature accom-
panying the appliance.
2
Advertisement
