Advertisement
ATTENTION
1. Read the manual and follow the instructions relating to safety tips, correct and complete product assembly, setting into service, use and maintenance.
2. For your own safety, always heed the advice and warnings in these instructions.
3. Non-compliance with these operating instructions may expose you to serious danger. Only use the product in the places and conditions for which
it is intended.
4. Keep away from heat, rough surfaces and all sharp objects.
5. See product or packaging for additional warning.
MAINTENANCE AND CARE
1. To Store: Simply deflate, and gently fold. Dry before storing. Store in a well-ventilated area, keep out of direct sunlight.
2. To Clean: Rinse with warm soapy water and hang to dry. Never iron or brush. Do not clean with solvent cleaning agents - this will damage the product permanently.
3. Do not drag while it is loaded or sharp object can puncture.
REPAIR INSTRUCTIONS
1. Clean the area of repair thoroughly.
2. Press the repair patch firmly over the puncture for 60 seconds.
3. Do not inflate until 30 minutes after Step 2 is done.
4
Advertisement
