Advertisement
CAUTION: Make sure the battery compartment is completely free of water before replacing with or inserting new batteries. Turn the battery box so
that the battery cover is facing the ground (Fig. 1) for 30 seconds.
1. When the LED lights are flashing, replace with new batteries.
2. Use a Phillips-head/cross screwdriver (not included) to loosen the screws on the battery compartment cover (screws stay attached to cover), and
remove the cover (Fig. 2).
3. Insert 4 new 1.5V AA batteries size batteries (not included), alkaline batteries recommended (Fig. 3).
4. Make sure the waterproof cushion is in place for an airtight seal (Fig. 4). Then replace the cover, and retighten the screws.
5. You will find the LED string immediately on. You can switch it off by pressing the power button (Fig. 5).
6. Keep the product away from water when not in use.
Fig. 1
+ - + -
Fig. 4
• The built-in timer will default to switch off the lights after 4 hours ON.
• To turn on/off the LED lights, click the power button once.
• When LED lights are on, the colors change automatically; every 60 seconds, the color of every LED starts from red.
BATTERY BOX INSTRUCTIONS
Waterproof Cushion
TURN ON/OFF LED LIGHTS
OWNER'S MANUAL
Fig. 2
Fig. 5
Power Button
Fig. 3
Power Button
3
Advertisement
