Advertisement
Read and follow the instructions, in order to assemble the product correctly and ensure safe use.
HOW TO INFLATE
1. Take the product out of box, and make sure all parts are included.
2. Inflate the product through air valves .
3. Then seal the valve with valve lid, and press the valve into the unit to get a flat surface.
NOTE: Do not use air compressor to inflate, or the product will be easily destroyed. If the valve cannot be recessed into the unit, it may be an indication
of overinflation. Pinch valve at its base with fingers to let the air out. Then seal the valve with its lid, and press the valve into the unit to get a flat surface.
HOW TO DEFLATE
Open the lid of valve to let the air out. When all the air has been released, seal the valve with the lid. Keep away from small children - small parts, choking hazard.
1. CAUTION: Replace only with 4xAA 1.5V batteries.
2. Non-rechargeable batteries are not to be charged.
3. Rechargeable batteries are only to be charged under adult supervision.
4. Rechargeable batteries are to be removed from the inflatable before being charged.
5. The supply terminals are not to be short-circuited.
6. Different types of batteries or new and old batteries are not to be mixed.
7. Batteries are to be inserted with correct polarity.
8. Exhausted batteries are to be removed from the inflatables.
9. Dispose of batteries safely following directions on batteries.
10. Do not dispose of batteries in fire.
11. Do not ingest batteries. Keep away from children.
12. Remove used batteries promptly.
13. For recycling and disposal of batteries to protect the environment, please check the internet or your local phone directory for local recycling centers
and/or follow local government regulations.
2
SETUP INSTRUCTIONS
BATTERY INFORMATION
Advertisement
