Canon imageCLASS MF6500 Series Basic Manual page 182

FAX SETTINGS (MF6550/MF6560/MF6580 Only)
4. TIME OUT
5. DIALING LINE CHCK
4. RX SETTINGS
1. ECM RX
2. FAX/TEL OPT. SET
1. RING START TIME
2. F/T RING TIME
3. F/T SWITCH
ACTION
3. DRPD:SELECT FAX
13-15
Sets whether to scan a document automatically after
entering the fax number.
* This function is not available when you dial with the numeric keys.
– ON
– OFF
Sets whether to check the telephone line condition.
– ON
– OFF
Sets the reception functions.
Sets whether the ECM (Error Correction Mode) reception is
activated.
– ON
– OFF
Sets the optional items in <FaxTel> mode. (See Chapter 1,
"Advanced Fax Features," in the Advanced Guide.)
Sets the time the machine takes to check whether a call is a
fax or a voice call. (0SEC-30SEC)
Selects the ring length for voice calls. (15SEC-300SEC)
Selects whether the machine switches to receive mode after
the ring time has elapsed, or whether if disconnects the call.
– RECEIVE
– DISCONNECT
Selects the ring pattern for fax calls.
– DOUBLE RING
– SHORT-SHORT-LONG
– SHORT-LONG-SHORT
– OTHER RING TYPE
– NORMAL RING