Additional Information; Specification; Replacement Of Battery; Open Source Software Notice - LG BP250 Simple Manual

Additional Information

Specification

AC adapter
Networked standby
power consumption
Dimensions
(W x H x D)
Net Weight (Approx.)
Bus Power Supply
(USB)
Design and specifications are subject to change without
notice.

Replacement of battery

Open source software notice

To obtain the source code under GPL, LGPL, MPL and other
open source licenses, that is contained in this product,
please visit http://opensource.lge.com.
In addition to the source code, all referred license terms,
warranty disclaimers and copyright notices are available for
download.
LG Electronics will also provide open source code to you
on CD-ROM for a charge covering the cost of performing
such distribution (such as the cost of media, shipping and
handling) upon email request to opensource@lge.com. This
offer is valid for three (3) years from the date on which you
purchased the product.
BP250-P_BARELLK_SM_MFL68819746_ENG_FRE.indd 3
y Model : WA-12M12FK
y Manufacturer :
Asian Power Devices Inc.
y Input : 100-240 V~,
50-60 Hz 0.5 A Max.
y Output : 12 V 0 1 A
0.5 W (If all network ports
are activated.)
Approx.
270 mm x 43 mm x 195 mm
0.83 kg
5 V 0 500 mA
POWER: This unit operates on a mains supply of
100-240V~, 50/60Hz.
Wiring: This unit is supplied with a BS 1363 approved
main plug. When replacing the fuse, always use of the
same rating approved to BS 1362. Never use this plug
with the fuse cover omitted. To obtain a replacement
fuse cover contact your dealer. If the type of plug
supplied is not suitable for the mains sockets in your
home, then the plug should be removed and a suitable
type fitted. Please refer to the wiring instructions below:
Warning: A mains plug removed from the mains lead
of this unit must be destroyed. A mains plug with bared
wires is hazardous if inserted in a mains socket. Do not
connect either wire to the earth pin, marked with the
letter E or with the earth symbol 6 or coloured green
or green and yellow. If any other plug is fitted, use same
rating of fuse in the plug.
Important: The wires in this mains lead are coloured in
accordance with the following codes:
- BLUE: NEUTRAL, BROWN: LIVE - As the colours of the
wires in the mains lead of this unit may not correspond
with the coloured marking identifying the terminals in
your plug, proceed as follows: The wire which is coloured
blue must be connected to the terminal which is marked
with the letter N or coloured black. The wire which is
coloured brown must be connected to the terminal
which is marked with the letter L or coloured red.
2015-08-12 12:08:14