Canon imageCLASS MF3110 Software Manual page 4

A
5 Load the paper into the cassette. Make sure
the paper stack sits below the hooks (A).
7 Even out the edges of the paper stack.
Make sure the height of the stack does not
exceed the limit marks
side edges of the stack are below the hooks
(B).
9 Insert the tabs on the extension cover into
➊
the slots on the back of the machine, and
carefully lower the cover
the cassette extension beneath it.
B
and that the
➋
until it sits on
6 Pinch and slide the side paper end guides to
match the size of paper.
8 Insert the paper cassette back into the
machine as far as it will go.
NOTE
If you do not completely insert the cassette into the
●
machine, paper jams may occur.
IMPORTANT
Do not load paper from the back of the machine. Doing
●
so may damage the paper feeding assembly inside the
machine.