Table of Contents
Advertisement
...6 PROGRAMMING & ELECTRICAL CALIBRATION
...6.4 Set Up Outputs Page
1 0 0 0
.
Test Retrans (%)
0 0 0 0 0
Alter Sec. Code
0 0 0 0 0
Alter Cal. Code
Return to
— — — —
top of page
ELECTRICAL CAL
26
Test Retransmission Output
The instrument automatically transmits a test signal of 0, 25, 50, 75 or 100% of the
retransmission range selected above. The % test signal selected is shown on the upper
display.
– for a selected range of 0 to 20 mA and 50% retransmission test signal, 10 mA is
Example
transmitted.
Select the required retransmission test signal.
Alter Security Code
Set the security code to a value between 00000 and 19999. This value is then reentered to
gain access to the secure parameters.
Alter Calibration User Code
Set the security code to a value between 00000 and 19999.
Advance to
Electrical Calibration Page
.
Advertisement
Table of Contents
