Canon Powershot SD40 Digital ELPH User Manual page 9

Remote Control Sensor
Transmitter
Other than the operations listed above, all of the buttons perform
the same functions as the corresponding buttons on the camera.
However, functions requiring the user to press two buttons at the
same time can only be performed with the camera.
The distance at which the wireless controller can be used
will shorten under the following circumstances.
• When operated at an angle to the remote control sensor
• When strong light strikes the remote control sensor
• When the wireless controller battery is weak
• When used outside
Indicator
The camera indicator lights or blinks under the following circumstances.
Never do the following while an indicator is blinking green.
These actions may corrupt image data.
• Shake or jolt the camera
• Shut off the power, or open the memory card slot/battery
cover
Green:
Blinking Green:
Orange:
Blinking Orange: Ready to shoot (camera shake warning)
Ready to shoot /connected to a computer/display off
(Advanced Guide p. 26)
Camera starting up/image recording/reading/eras-
ing/transferring (when connected to a computer)
Ready to shoot (flash on)
*Camera beeps once if difficult to focus.
Pressing this button toggles
between transferring to a
computer and playing back on
the LCD monitor.
The information display mode
advances (Standard—
Detailed—Off) each time you
press this button.
7