Canon Powershot SD40 Digital ELPH User Manual page 22

1.
Slide the mode switch to
(playback) (
The last image that was played back appears
(Resume Playback). If additional images were
shot after viewing images in playback mode,
the last image that was shot will appear
instead. If the memory card has been switched, or the images on the
memory card have been edited with a computer, the newest image on
the memory card appears.
2.
Use the
view (
Use the
button to move the next image.
Holding the button down advances the images more rapidly, but
shows them less clearly.
1.
In the playback mode, use the
button to select an image to erase
( ) and press the
2.
Confirm that [Erase] is selected and
press the FUNC./SET button (
To exit instead of erasing, select [Cancel].
Please note that erased images cannot
be recovered. Exercise adequate
caution before erasing an image.
When you place the camera in the camera station, you can
operate the camera with the wireless controller for playing
back or erasing images (p. 6) .
20
Playback
).
or button to display the image you wish to
).
button to move to the previous image and the
See the Advanced Guide for the various playback methods available
Erasing
See the Advanced Guide: Erasing Images (p. 89).
or
button ( ).
).