Charging The Battery - Canon Powershot S100 Getting Started

Charging the Battery

Use the included charger to charge the battery. Be sure to charge the battery
as it is not charged at the time of purchase.
CB-2LX
CB-2LXE
To protect the battery and prolong its life, do not charge it for longer than
24 hours continuously.
Remove the cover.
Insert the battery.
Align the marks on the battery and
charger, then insert the battery by sliding it
in ( ) and down (
Charge the battery.
For CB-2LX: Flip out the plug (
plug the charger into a power outlet (
For CB-2LXE: Plug the power cord into
the charger, then plug the other end into a
power outlet.
The charge lamp lights orange and
charging starts.
The charge lamp will light green when
charging has finished. Charging takes
approx. 2 hours and 5 minutes.
Remove the battery.
Unplug the battery charger from the power
outlet, then remove the battery by sliding it
in ( ) and up (
).
) and
).
).
9