Advertisement
Available languages
Available languages
With this kit one can easily determine whether a wire is live or not. This kit can be used to detect wiring within walls or breaks
in cabling. A flashing LED shows whether a current is detected, while the speed at which the LED flashes indicates how
close one is to the wiring. For those wanting an audible signal, space is provided on the print for connecting a buzzer type
SV4/12. The small PCB has been specially designed to be incorporated into the separately available casing type G407.
TECHNICAL SPECIFICATIONS
Detection of phase conductor
LED indicator (buzzer as option)
Adjustable detection range (10cm max.)
Range indication
Supply: 9V battery
Dimensions: 56x64mm
ASSEMBLY (SKIPPING THIS CAN LEAD TO TROUBLES ! )
Ok, so we have your attention. These hints will help you to make this project successful. Read them carefully.
Make sure you have the right tools:
A good quality soldering iron (25-40W) with a small tip.
Thin raisin-core solder. Do not use any flux or grease.
A diagonal cutter to trim excess wires.
1. Follow the instructions carefully. Read and understand the entire step before you perform each operation.
2. Perform the assembly in the correct order as stated in this manual
3. Use the check-boxes to mark your progress.
4. Please read the included information on safety and customer service
8
LIVE WIRE DETECTOR
Advertisement
