Canon EOS 10D Instruction Manual page 30

3
Remote Shooting in the EOS Capture
This chapter explains how to use the EOS Capture for taking shots remotely
from your computer.
For more information on the restrictions of the EOS Capture, refer also to the source
listed below.
ReadMe: Double-click the [Canon Utilities] folder
[ReadMe (EOS Capture)].
Remote shooting in the EOS Capture is available with the EOS-1D Mark II N, EOS-1Ds
Mark II, EOS-1D Mark II, EOS-1Ds, EOS-1D, EOS 5D, EOS DIGITAL REBEL XT/350D
DIGITAL and EOS 20D.
EOS Capture cannot be used when the camera's communication mode is set to [Print/PTP]
or [PTP]. Set the camera's communication mode to [PC connect.], [PC connection] or
[Normal] (p.1-1).
Click on the item to display its page.
Remote Shooting................................................................................................ 3-2
Single-frame Shooting ..................................................................................... 3-2
Timer Shooting................................................................................................. 3-3
Interval Timer Shooting.................................................................................... 3-3
Specifying the Camera Settings........................................................................ 3-3
the [EOS Capture] folder
Camera Settings .............................................................................................. 3-3
White Balance Adjustment............................................................................... 3-4
Specifying the Save Destination ...................................................................... 3-4
Cover/Table of
Contents
Introduction
Downloading Images 1
from the Camera,
and Camera Settings
2
Working with
Images in the
ImageBrowser
3
Remote Shooting in
the EOS Capture
Setting the EOS 5D 4
and EOS-1D Series
Cameras
5
Troubleshooting
and Uninstalling
the Software
Index
3-1