Using Your Machine - Vax Compact Power CWCPV011 Manual

USING YOUR MACHINE

Filling the clean water/solution tank
Lift and pull to remove the
clean water/solution tank.
Replace the clean water/
solution tank cap and
twist clockwise to tighten.
Operation
Plug into the mains.
Press the On/Off pedal to
switch the machine on.
Twist the clean water/
solution tank cap
anti-clockwise to remove.
Place the tank onto the
machine and push into place.
Press the handle release
pedal and pull the handle
backwards.
Fill the clean water/solution
tank with warm water (max
40°C) to the water fill line.
Squeeze the trigger to
release the solution and
water mix.
Pour the required amount
of solution to the solution
fill line.
For best results apply
water/solution on the
forward stroke and
release the trigger on the
backward stroke to pick up
water/solution. Follow with
an additional dry stroke
with no trigger pressed.
9