What To Do If It Goes Wrong - Vax Compact Power CWCPV011 Manual

WHAT TO DO IF IT GOES WRONG

WARNING: Always switch off and unplug the machine before performing any maintenance or troubleshooting checks.
There is an accessory missing
• Check the contents on the box to make sure the part is definitely included with your machine.
Why won't the machine turn on?
• The plug may not be fully pushed into the electrical socket.
• The fuse in the plug may need replacing. Always replace with a British 13amp fuse.
Why won't the machine pick up?
• The float in the dirty water tank may have been activated. Empty the dirty water tank and wait for the float to settle before
re-starting your machine. See Emptying and cleaning the dirty water tank page 10.
• Check the brushbar for blockages and clear.
• The dirty water tank may not be fitted correctly.
• Check the nozzle for blockages and clear.
• Check the filter screen located underneath the dirty water tank.
Why won't the brushes spin?
• Check the brushbar is correctly fitted. See Removing and cleaning the brushbar
• Check the brushbar for blockages and clear.
• Check for damage to the brushbar.
Why won't the solution/clean water dispense?
• Make sure the clean water/solution tank is fitted securely. See Filling the clean water/solution tank page 9.
• The clean water/solution tank valve may be stuck, hold the clean water/solution tank over the sink and press the valve
underneath to release.
• Squeeze the trigger on the handle to release solution and water mix.
• The water/solution tank is empty. Refill the tank. See Filling the clean water/solution tank page 9.
12
Removing and cleaning the brushbar
See
Emptying and cleaning the dirty water tank
See
Removing and cleaning the nozzle
See
See Cleaning the filter page 10.
Removing and cleaning the brushbar
See
page 11.
page 10.
page 11.
page 11.
page 11.