Relay Recording - Canon Vixia HF M41 Instruction Manual

Relay Recording

You can activate the relay recording so if the memory you are using
becomes full while recording movies, the recording will continue unin-
terrupted on a memory card.
When recording on memory card X, you can use memory card Y for
relay recording (497).
memory, you can choose to use only memory card X for relay record-
ing (f94), or use both memory cards (f9497).
Operating modes:
1 Insert a memory card that contains no video recordings into the
card slot of the memory card you want to use for relay recording.
• When relay recording from the built-in memory (
memory card slot X or both memory card slots.
• When relay recording from memory card X: memory card slot
Y only.
2 Activate the relay recording.
[FUNC.]
[f] (
8Desired option*
* The approximate available recording time will now reflect the combined space in
the memories used for relay recording.
NOTES
• You cannot use relay recording from the built-in memory to
memory card Y. When using a single memory card, be sure to insert it
into memory card slot X.
• There will be a momentary stop in the scene at the point where the
camcorder switches from one memory to another.
• Any of the following actions will deactivate the relay recording function:
- Turning off the camcorder.
- Opening the double memory card slot cover.
- Changing the position of the mode switch.
- Changing the camcorder's operating mode.
- Changing the memory used for recording movies.
8 8
[MENU]
only) or [4]
8
only: When recording in the built-in
8
8
[Rec Media for Movies]
8
[Relay Recording]
[a]
only):
8
Preparations
43