Using The Product; Warranty And Support - Philips 1000 Series Quick Start Manual

Using the product

Switching the product on and off
1 To switch on the product, turn the battery
compartment cover counterclockwise until the
setting indicator is aligned with the 'on'
indication (I) (Fig. 7).
2 To switch off the product, turn the battery
compartment cover clockwise until the setting
indicator is aligned with the 'off' indication (0).
Detaching and attaching the rotary
trimmer
Note: Switch off the product before detaching or
attaching the rotary trimmer.
1 To detach the rotary trimmer from the handle,
firmly grasp the attachment below the cutting
element and turn it clockwise until the setting
indicator points to the 'unlocked' indication (^).
2 Lift the attachment off of the handle. (Fig. 8)
1 To attach the rotary trimmer to the handle,
place the attachment on the handle with the
setting indicator pointing to the 'unlocked'
indication (^).
2 Firmly grap the attachment below the cutting
element and turn it clockwise until the setting
indicator points to the 'locked' indication (0).
Tip: If the rotary trimmer becomes clogged, detach
the attachment and rinse it thoroughly with warm
water before you reattach it.
Trimming ear hair
Make sure your outer ear channels are clean and
free from wax.
1 Switch on the product.
2 Slowly move the rotary trimmer along the rim of
the ear to remove hairs that stick out beyond
the rim.
Do not insert the rotary trimmer more than
5 mm (13/64 in) into your ear channel, as this
could damage the eardrum.
3 Carefully insert the rotary trimmer into the outer
ear channel. (Fig. 9)
4 Slowly turn the rotary trimmer around to
remove all unwanted hairs from your outer ear
channel.
5 Clean thoroughly after each use (see 'Cleaning').
Trimming nose hair
Make sure both the product and nasal passages
are clean before trimming. Dried nasal mucus can
block the cutting element, preventing the product
from turning on.
1 Switch on the product.
2 Carefully insert the rotary trimmer into one of
your nostrils.
Do not insert the rotary trimmer more than
5 mm (13/64 in) into your nostrils.
3 Slowly move the rotary trimmer around inside
each nostril (Fig. 10), making sure that you hold
the side of the trimmer firmly against the skin.
This will reduce the tickling effect that can
occur.
4 Clean thoroughly after each use (see 'Cleaning').
Cleaning
Do not immerse the motor unit in water or any
other liquid, or rinse it under the tap.
Never use scouring pads, abrasive cleaning agents
or aggressive liquids such as gasoline or acetone
to clean the product or any attachments or
accessories.
Do not tap on the cutting elements.
Do not use any sharp objects to clean the cutting
element.
Clean the rotary trimmer immediately after use and
when a lot of hair or dirt has accumulated on the
cutting element.
1 Use the cleaning brush to remove any excess
hair from the cutting element. (Fig. 11)
2 Switch on the product and rinse the nose hair
trimmer attachment with hot water (Fig. 12).
3 Turn off the product and remove the rotary
trimmer attachment.
4 Turn the attachment upside down, and rinse it
with lukewarm water (Fig. 13).
5 Carefully shake off excess water and let all parts
air dry.
Storage
Store the product in a safe, dry location. Make sure
that the product and accessories are completely
dry before you store them.
Disposal
Your product is designed and manufactured with
high quality materials and components, which can
be recycled and reused. For recycling information,
please contact your local waste management
facilities or visit www.recycle.philips.com.
This product contains batteries:
- Dispose of batteries properly. Do not incinerate.
Batteries may explode if overheated.
- Do not wrap in metal or aluminum foil. Tape the
waste battery terminals before discarding.
- It is suggested that you contact your local town
or city to determine proper battery redemption
site(s) in your area.
Removing the disposable battery
To remove the disposable battery, see chapter
'Preparing for use'.

Warranty and support

If you need information or support, please
www.philips.com/support or call toll free:
1-866-800-9311.