Adjusting The Focus Manually - Canon MVX10 Instruction Manual

Adjusting the Focus Manually

Autofocus may not work well on the following subjects:
E
Reflective surfaces
CAMERA
1. Set the program selector to
2. Adjust the zoom.
When you operate the zoom after adjusting the focus, the
subject may not stay in focus. Adjust the zoom before the focus.
3. Press the FOCUS button.
"MF" appears.
4. Turn the selector dial to adjust the focus.
Turn the selector dial up or down until the image appears
focused.
5. Press the FOCUS button to return to autofocus.
The setting resets to autofocus when you switch the program selector to [.
74
Subjects with low
contrast or without
vetical lines
PLAY (VCR)
Q
.
Fast Moving Subjects
CARD CAMERA
Through dirty or
wet windows
CARD PLAY (VCR)