Erasing Images - Canon MVX10 Instruction Manual

Erasing Images

You can erase images singly or all at once.
Be careful when erasing images. Erased images cannot be recovered.
❍ Protected images cannot be erased.
❍ When you select to erase all images, only those images in the respective
playback mode (still image or movie) will be erased.
❍ In movie playback mode, movies can be erased when
lower right of the movie.
❍ Make sure to insert a memory card that contains images.
Erasing a Single Image
CAMERA
1. Select the image you wish to erase.
2. Press the selector dial to open the FILE OPERATION menu.
3. Select [IMAGE ERASE].
• "ERASE THIS IMAGE?", [NO] and [YES] appears.
• If an image is protected, [YES] appears in purple.
4. Select [YES].
The image is erased and the previous image appears.
5. Select [b RETURN] to close the menu.
Erasing a Single Image/All Images
CAMERA
CARD OPERATIONS
( 41)
1. Open the menu and select [CARD OPERATIONS].
2. Select [IMAGE ERASE].
3. Select [SINGLE] or [ALL].
• When erasing a single image: "ERASE THIS IMAGE?" [NO] and [YES] appears. If an
image is protected, [YES] appears in purple.
• When erasing all images: "ERASE ALL IMAGES? [EXCEPT FOR
and [YES] appears.
4. Select [YES] and close the menu.
• When erasing a single image: The image is erased and the previous image appears. To
erase another image, select the image with the CARD +/– button and select [YES].
• When erasing all images: All still images or movies with exception of the protected ones
are erased.
PLAY (VCR)
PLAY (VCR)
IMAGE ERASE
CARD CAMERA
CARD CAMERA
IMAGES]", [NO]
is shown on the
CARD PLAY (VCR)
CARD PLAY (VCR)
E
119