Philips NORELCO S9000 Series Manual page 29

Cleaning the pop-up trimmer
5 Clean the cutter and guard under the tap.
6 Shake off excess water.
7 Put the shaving heads back into the shaving
head holder. For detailed instructions, see
'How do I replace the shaving heads?'.
8 Insert the hinge of the shaving head holder
into the slot in the top of the shaving unit
and close the shaving unit.
Clean the trimmer after each use to prevent
clogging and damage.
Never dry the trimmer teeth with a towel or
tissue, as this may damage the trimmer teeth.
1 Make sure that the product is switched off
and disconnected from the power outlet.
2 Push the trimmer release slide down to
open the pop-up trimmer.
3 Switch on the product and rinse the pop-up
trimmer with warm water.
4 After cleaning, switch off the product.
5 Carefully shake off excess water and let the
pop-up trimmer air dry.
6 Close the trimmer.
29
English