Wind Screen - Canon Elura Elura Instruction Manual

1. Make sure that the ELURA is switched off.
2. Lift the MULTI-CONNECTOR cover and align the multi-
connectors of the docking unit and the camera.
3. Push the docking unit onto the camera and turn the locking screw
clockwise to fix it securely onto the base.
• To remove, turn the locking screw counter-clockwise and pull the docking
unit from the base of the camera. Make sure to close the cover.
For greater creative control over audio
recording, you can connect an external
microphone to the camera via the
DU-200 Docking Unit's MIC terminal.
You can monitor the sound while
recording by attaching stereo
headphones to the H terminal on the
docking unit.
You can adjust the volume of attached
headphones by turning the selector dial.
• A VOLUME bar appears in the
display to indicate the current
volume.
• The selector dial also controls the
speaker volume once you remove the
headphones from the headphone
socket (p. 21).

Wind screen

The camera has an automatic wind screen to prevent wind noise from interfering
with the sound track. (It does not operate with an external microphone). Make
sure it's off when you want the microphone to be as sensitive as possible. Use the
wind screen when recording in windy places such as the beach or near buildings.
(see p. 30, 31)
1. Open the camera menu and point the arrow at WIND SCREEN.
2. Select the ON setting and close the menu.
• WS O is shown in the display.
WIND SCREEN•OFF
DC MIC
REMOTE
E
55