Built-In Speaker - Canon Elura Elura Instruction Manual

Indicators that appear when "mirror" is selected:
The tape has reached the end
Battery power remaining
Condensation warning
The battery pack is exhausted
• These indicators appear normally in the viewfinder.

Built-in speaker

The camcorder has a built-in speaker so you can review the sound track alongside
the picture during playback.
Adjust the speaker volume by turning the selector dial.
• Turn the selector dial up to increase the volume, and down to lower the volume.
• A VOLUME bar appears in the display to indicate the current volume. It
disappears in four seconds.
• You can turn off the built-in speaker completely by turning the selector dial
down until OFF appears.
• You can also adjust the headphones volume separately from the built-in speaker.
(Use the optional DU-200 Docking Unit to connect the headphones, p. 54)
• The levels you adjust for the built-in speaker and headphones are memorized
separately. The camera remembers your levels even if you turn the camera off
and back on again.
Notes:
• The speaker turns off when the camera is set to camera mode or when you use
headphones.
• Sometimes the playback picture becomes rough with "noise", when the volume
is turned up high. If this happens, turn down the volume.
REC
REC PAUSE
EJECT
STOP
Image stabilizer
Zoom
Exposure Adjustment
Self-timer
Manual focus
. F M .
White balance
No Cassette is loaded
Photo mode AF/AE mark
E
21