Canon DC330 Instruction Manual page 84

REACHED THE MAXIMUM NUMBER OF
SCENES
- The maximum number of scenes has
been reached. Delete some recordings
(DVD-RW in VR mode) to free some
space ( 37) or replace the disc.
RECOVERING DATA
PLEASE WAIT...
- Data on the disc is being recovered.
Wait until this message disappears
before resuming use.
TASK IN PROGRESS DO NOT
DISCONNECT THE POWER SOURCE
- The camcorder is updating important
file allocation data on the disc. Do not
disconnect the compact power adapter
or remove the battery pack.
TEMPERATURE TOO HIGH CANNOT
•
RECORD
TEMPERATURE TOO HIGH CANNOT
•
REMOVE DISC
- The camcorder has exceeded its
operational temperature. Disconnect
the compact power adapter and
remove the battery and let the
camcorder cool down before resuming
use.
TOO MANY STILL IMAGES
DISCONNECT USB CABLE
Disconnect the USB cable and decrease
the number of still images on the memory
card to less than 1,800. If a dialog
appeared on the computer screen, close
it and then restore the connection.
TRANSFER ORDER ERROR
You attempted to set more than 998
transfer orders (
UNABLE TO RECOGNIZE THE DATA
- The disc may not be recognized by this
camcorder if it was initialized with a
different device.
- You inserted a disc recorded in a
different Television System (PAL or
SECAM).
UNABLE TO RECOVER DATA
- Could not recover a corrupted file.
- This message can also appear if
condensation has formed. If you
suspect condensation is the reason, do
not initialize the disc and wait until the
84 •
Additional Information
70).
camcorder dries completely before
resuming use (
UNFINALIZE THE DISC
- You cannot record additional scenes on
a finalized DVD-RW in VIDEO mode.
Unfinalize the disc first (
USE OF A RECOMMENDED DISC IS
ADVISED
- The disc can be used but performance
is not guaranteed. We recommend that
you use a disc that has been tested
( 6).
Direct Print Related Messages
About Canon PIXMA/SELPHY DS
Printers: If the printer's error indicator
flashes or an error message appears on
the printer's operation panel, refer to the
printer's instruction manual.
CANNOT PRINT!
- You attempted to print an image that
was recorded with another camcorder,
with a different compression, or was
edited on a computer.
COMMUNICATION ERROR
- The printer is experiencing a data
transfer error. Cancel printing.
Disconnect the USB cable and turn off
the camcorder and the printer. After a
short while, turn them on again, set the
camcorder to
restore the connection. If you
attempted to print from a memory card
that contains a large number of images,
reduce the number of images.
COULD NOT PRINT X IMAGES
- You attempted to use the print order
settings to print X images that were
recorded with another camcorder, with
a different compression or were edited
on a computer.
FILE ERROR
- You attempted to print an image that
was recorded with another camcorder,
90).
50).
mode and