Photos; Basic Recording; Taking Photos - Canon DC330 Instruction Manual

Photos

Refer to this chapter for details on shooting photos – from capturing
and playing back images to printing them.

Basic Recording

Basic Recording

Taking Photos

Before using a memory card for the
first time, be sure to initialize it with
this camcorder (
1
Move the /
images).
2
Turn the
the camcorder in CAMERA mode.
The red CAMERA indicator will turn
on.
52 •
Photos
60).
( 22)
switch to (still
switch to ON to set
3
Move the lens cover switch down
to to open the lens cover.
4
Start/Stop
Press .
• Once the focus is automatically
adjusted, will turn green and one
or more AF frames will appear.
• The CARD access indicator will
flash as the still image is being
recorded.
• When you press
wireless controller, the still image is
recorded after the autofocus is
activated and locked.
IMPORTANT
Observe the following precautions while
the card access display (
screen, and when the CARD access
indicator is on or flashing. Failing to do so
may result in permanent data loss.
- Do not subject the camcorder to
vibrations or strong impacts.
- Do not open the memory card slot cover
and do not remove the memory card.
- Do not disconnect the power source or
turn off the camcorder.
- Do not change the position of the
switch or the operating mode.
NOTES
If the subject is not suitable for autofocus,
turns yellow. Adjust the focus manually
( 42).
PHOTO
on the
) appears on
/