Canon DC330 Instruction Manual page 28

Retract the grip belt under the
camcorder so it will not get in the way
of the disc cover.
3
Insert the disc and press its center
firmly until it clicks in place.
• Insert the disc with the recording
side facing down (single sided
discs – label side facing out).
• Be careful not to touch the
recording surface of the disc or the
pick up lens.
4
Close the disc cover.
Do not force the cover closed if the
disc is not correctly inserted and
firmly set in place.
NOTES
The process of recognizing a disc may take
a moment. The display will move while
the disc is being read. Wait until the
camcorder finishes recognizing the disc
before you start recording.
W DVD-R/DVD-R DL
HEN USING
You can start recording movies once the
record pause
W DVD-RW
HEN USING
You need to initialize new discs before
you can start recording. The disc
initialization screen will appear when a
28 •
Preparations
DISCS
indicator appears.
DISCS
new DVD-RW disc is first inserted if the
/ switch is set to
the disc is already initialized, you can
start recording movies once the record
pause indicator appears.
Otherwise, perform the following steps
to initialize the disc.
Select ( ) the desired disc
specification and press
comparison between the VIDEO and
VR specifications, see How to Select
a DVD Disc (
A confirmation message will appear
on the screen. Select (
press to start the disc
initialization, or select [NO] and press
to return and select a different
disc specification.
• The disc initialization will take
approximately one minute. Avoid
moving the camcorder while the
operation is in progress.
• You can start recording movies
once the record pause
indicator appears.
Removing the Disc
1
Slide OPEN fully in the direction of
the arrow and gently open the disc
cover completely until it stops.
• Do not subject the camcorder to
strong impacts while the DISC
access indicator is on or flashing.
(movies). If
. For a
5).
) [YES] and