Preparing The Accessories - Canon DC310 Instruction Manual

Dvd camcorder
Hide thumbs Also See for DC310:
Table of Contents

Advertisement

O
NCE THE BATTERY PACK IS FULLY CHARGED
1 Disconnect the compact power
adapter from the camcorder.
2 Unplug the power cord from the
power outlet and the compact
power adapter.
T
O REMOVE THE BATTERY PACK
BATT.
Press
to release the battery
pack. Slide the battery pack down
and then pull it out.
IMPORTANT
• Turn off the camcorder before
connecting or disconnecting the
compact power adapter. After you turn
the
switch to
allocation data is updated on the disc.
Be sure to wait until the PLAY and
CAMERA mode indicators are
completely off.
• You may hear some noise from the
compact power adapter during use.
This is not a malfunction.
• We recommend charging the battery
pack in temperatures between 10 °C
and 30 °C (50 °F and 86 °F). Outside the
temperature range of 0 °C to 40 °C
(32 °F to 104 °F), the charging will not
start.
• Do not connect to the camcorder's DC
IN terminal or to the compact power
adapter any electrical equipment that is
not expressly recommended for use
with this camcorder.
• To prevent equipment breakdowns and
excessive heating, do not connect the
supplied compact power adapter to
voltage converters for overseas travels
or special power sources such as those
on aircraft and ships, DC-AC inverters,
etc.
, important file
NOTES
• The CHARGE indicator also serves as a
rough estimate of the charge status.
Continuously on: Battery pack fully
charged.
Two quick flashes at 1-second intervals:
Battery pack at least 50% charged. If
the indicator flashes quickly but not
exactly in this pattern, refer to
Troubleshooting (
One flash at 1-second intervals: Battery
pack less than 50% charged.
• We recommend that you prepare battery
packs to last 2 to 3 times longer than
you think you might need.
• U.S.A. and Canada only: The
Lithium ion/polymer battery
that powers the product is
recyclable. Please call
1-800-8-BATTERY for
information on how to recycle
this battery.

Preparing the Accessories

Fasten the grip belt.
Adjust the grip belt so that you can
reach the zoom lever with your index
Start/Stop
finger, and the
your thumb.
70).
button with
• 19
Preparations

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents