Installing Low Cut Filters; Cleaning The Cabinets - Cambridge SoundWorks Powered Subwoofer Instructions Manual

Installing Low-Cut Filters
• The filters can go at either end
of the speaker wires of the Left
and Right Main speakers. You
can, for example, connect one
filter's INPUT FROM AMP leads
to speaker outputs on your
receiver or amplifier, then
connect the speaker wire to the
filter's OUTPUT TO SPEAKER
leads with the wire nuts
supplied. Or, you can attach a
filter right to the back of a
speaker. Connect the filter's
OUTPUT TO SPEAKER leads to
your speaker's input terminals.
• As with all speaker connections,
be sure to maintain consistency
with respect to the + and —
terminals on the receiver and
those on the speakers, including
the Powered Subwoofer. The
connecting wires on the filters
are coded by the use of one
copper-colored conductor and
one silver.

Cleaning The Cabinets

If more than dusting is needed,
the finish on either subwoofer can
be cleaned with a window or vinyl
cleaning product. Avoid spraying
the cleaner directly on the speaker
grille to prevent damage to the
grille or the speaker.
9